Is this the right tool for your job?
✕CHOOSE A DIFFERENT TOOL WHEN
- Cutting in a room. A wall-to-ceiling or wall-to-trim cut line wants a 1-1/2″–2-1/2″ angular sash brush (Hyde Millenium 47370-series, Richard B5 sash family). At 1″ this brush is the bridge into that range, not a substitute for a sash brush on a full room.
- Oil, alkyd, and varnish. SRT is a waterborne filament; natural white or black bristle lays oil paint, varnish, and oil stain better (Hyde Extra 47380-series, Richard bristle brushes).
- Flat fields. A flush door field, a wall, or a broad flat surface is a flat brush’s or roller’s job; the trim brush is for edges and members.
- Fine muntins and slivers. Divided-light bars and narrow grilles a 1″ brush overshoots belong to the 5/8″ (13415) or 3/4″ (13418).
Jobs this tool does
EXACT JOB METHODS FOR RICHARD №13425✓ Job guideHow to Paint Interior Trim, Doors, and WindowsOPEN JOB GUIDE →
For these jobs—use this instead
THE JOB, THE REASON, AND THE BETTER TOOL✕ Cutting in a roomA wall-to-ceiling or wall-to-trim cut line wants a 1-1/2″–2-1/2″ angular sash brush (Hyde Millenium 47370-series, Richard B5 sash family). BETTER TOOL 1-1/2” Millenium Angled Sash Brush 47370 →✕ Oil, alkyd, and varnishSRT is a waterborne filament; natural white or black bristle lays oil paint, varnish, and oil stain better (Hyde Extra 47380-series, Richard bristle brushes). BETTER TOOL 1″ Straight Brush, White bristle 47380 →✕ Fine muntins and sliversDivided-light bars and narrow grilles a 1″ brush overshoots belong to the 5/8″ (13415) or 3/4″ (13418). BETTER TOOL 5/8″ Elegance Trim Brush, Soft-Grip 13415 →
How the pros run it
01
Load the tip third, keep the heel clean
Dip a third to half of the bristle and never to the ferrule; heel-dried paint splays a brush for good. Tap off, don’t wipe. Tapping each face inside the can preserves the large SRT reservoir; wiping the rim throws it away. Present the chisel edge, pull one pass. Set the thin tapered edge to the sightline, start short of the end, return into the corner, and draw the line in a single stroke as the tips gutter paint to the edge — single-pass discipline matters most on the widest brush, since a doubled stroke on a full inch of face shows in raking light. Keep a wet edge in fast waterborne paint. Save the brush at the heel: rinse under warm water, clear the base of the fill first, comb the filaments parallel, spin or shake dry, and store in the keeper so the taper and the square inch of edge hold true.
