Home » Shop » Paint Applicators & Accessories » Hyde Tools 47317 4″ E-volution Mini Roller Cover, 3/8″ Nap, 2-Pack

Hyde Tools 47317 4″ E-volution Mini Roller Cover, 3/8″ Nap, 2-Pack

Original price was: $2.62.Current price is: $1.71.

Sale!
SKU: H-47317 Category:

Is this the right tool for your job?

✓CHOOSE THIS WHEN

  • Ultra-Thin Microfiber Blend: Constructed from a dense matrix of microscopic fibers that hold up to three times more paint than a standard roller cover.
  • Flawless, Spray-Like Finish: Automatically levels and distributes paint with virtually zero stipple, yielding a mirror-smooth look.
  • Maximum Shed Resistance: Tightly locked, premium synthetic filaments prevent lint and loose fibers from shedding into wet paint.

✕CHOOSE A DIFFERENT TOOL WHEN

  • Invisibly touching up a wall that was rolled with a 9″ — the important one.
  • A mini on a conventional mini core lays mini-scale stipple, and against a full-size 9″-rolled field that different texture can flash in any sheen above flat.
  • The cover engineered for invisible touch-ups is the 4″-on-a-full-1-1/2″-core (47353/47354): it mounts like a short 9″ cover and matches the big cover’s film build and stipple, so patches disappear.
  • Reach for that for touch-ups; reach for this for painting small areas fresh.
  • Big open walls — a full room wants a 9″ (47302); this is small-area and detail work.

Jobs this tool does

EXACT JOB METHODS FOR HYDE №47317 Job guideHow to Paint Trim, Baseboards, and Casing — Diagnose, Cut, Roll, and Read the FinishOPEN JOB GUIDE

For these jobs—use this instead

THE JOB, THE REASON, AND THE BETTER TOOL Big open wallsA full room wants a 9″ (47302); this is small-area and detail work. BETTER TOOL 9″ E-Volution, 100% Lint Free 47302 Invisible touch-upsIt mounts like a short 9″ cover and matches the big cover’s film build and stipple, so patches disappear. BETTER TOOL 4″ E-VolutionRoller Cover 3/8″ Nap, 1 47353

How the pros run it

01

Light pressure

is the rule microfiber enforces — the big capacity floods a wall if you lean on it (Hyde says so directly), so let the nap meter the paint. Pre-dampen for waterborne paint and load full and quiet; a hiss or skip means starved, drips mean overloaded. Lay off each patch with one light set of passes in a single direction so the stipple aligns. Reload a touch more often than you would with a jumbo — the conventional core is the smaller tank. De-lint a new cover before its first load (wrap-and-rip with painter’s tape) even though microfiber sheds little, and clean it to keep it: spin out, wash to clear, stand on end to dry so it never flat-spots.