Maibec — Modern em+ Siding (1″ x 6″)
Modern em+ siding is made from kiln-dried SPF (spruce–fir) and factory-coated on all six sides in a controlled environment for consistent stain absorption and increased protection against sun and weather. For exterior use only.
Download the technical sheet
General Specifications
- Species: Spruce–Fir (SPF), sound tight knot
- Manufacturing: kiln-dried (KD) to 12%–16% moisture
- Lengths: 6′ to 16′ random lengths (bundled)
- Stain type: low-VOC, water-based stains
- Coating: factory-coated on all six sides
Installation Orientation
Horizontal or vertical installation is permitted.
Note: With the Maibec em+® installation system, a vertical installation may result in more visible staples than a horizontal installation.
Finishes
Available in Textured and Maibec URBAHN® brushed-face.
- Textured: available in Regular and Maibec em+® installation systems
- URBAHN® brushed-face: available only in 6″ em+®
Colour Series
SOLID
- 111 — White
- 399 — Black
- 010 — Ocean Grey
- 014 — Lamosite
- 015 — Timber
- 016 — Hematite
NATURAL
- 052 — Algonquin Amber
- 053 — Muskoka Brown
- 058 — Coastal Charcoal
- 059 — Ocean Spray
- 062 — Meadow Greige
- 063 — Sunkissed Beige
6″ Profile Dimensions
Nominal dimensions commonly referenced as 1″ × 6″ (actual dimensions vary by installation system below).
| Profile | Installation System | Finish | Random Lengths | Actual Size (T × W) | Exposed Surface | Overlap | Orientation | Lead Time |
|---|---|---|---|---|---|---|---|---|
| Modern 6″ | Regular | Textured | 6’–16′ random | 5/8″ × 5 5/16″ | 4 3/4″ | 9/16″ | Horizontal / Vertical | 1 week |
| Modern 6″ | Maibec em+® | Textured / URBAHN® brushed-face | 6’–16′ random | 5/8″ × 5 1/4″ | 4 9/16″ | 11/16″ | Horizontal / Vertical | 1 week |
Fastening System
Regular Installation System (Nails)
- Use Maibec hot-dipped zinc galvanized ring shank nails with a textured head, corrosion resistant and factory-stained to match. (Order nails with the siding.)
- A plastic hammer end cap is provided to protect the stain on nail heads.
- Estimated quantities:
- Simple nailing: 15 lbs of nails per 1,000 sq. ft.
- Double nailing (6″): 30 lbs of nails per 1,000 sq. ft.
Coastal installations may require specific fastening details—refer to the Maibec installation guide for applicable regions.
Maibec em+® Installation System (Staples)
- Fasten using 2″, 7/16″ crown, 16 gauge, resin-coated stainless steel SUS 304 staples.
- Estimated quantities: 3,000 staples (1 box) per 750 sq. ft.
- Also order 1 lb of 2″ nails per 1,000 sq. ft. to nail the starter course, tops of walls, and around openings.
- Recommended: Maibec em+® stapler guide (available through Maibec retailers).
- Compatible pneumatic staplers (with the em+® stapler guide): HITACHI™ (N5008 AC 1″ and AC 2″), MAKITA™ (AT1150A), SENCO™ (SNS41) and certain discontinued models (SNS50XP/SNS45XP/SNS44XP).
Warranty (Summary)
Some restrictions apply—see detailed warranty documentation.
WARRANTY — SIDING (TEXTURED FACE)
- 50 years against wood decay
- 15 years on solid stain (2 coats)
- 8 years on natural tones stain
- 5 years on labour
WARRANTY — SIDING (BRUSHED FACE / MAIBEC URBAHN®)
- 50 years against wood decay
- 10 years on solid stain (2 coats)
- 8 years on natural tones stain
- 3 years on labour
Wall Preparation (Key Requirements)
- Install over a standard wall with studs up to 16″ on-centre
- Sheathing: OSB or plywood
- Weather barrier: approved water-resistive barrier
- Install vertical furring strips into studs (per code and Maibec requirements) to create a continuous air gap, especially when used with ventilation and drainage accessories.
Complementary Accessories
- Ventilation & drainage accessories: ventilated strips with a perforated 50% open pattern to support airflow/drainage and reduce pest entry.
- Metal corners: inside and outside corners with a sleek finish (available in 10′ lengths).
