Is this the right tool for your job?
✓CHOOSE THIS WHEN
- Compatibility: Ideal for use with Hyde dust-free sanders.
- Sizes Available: 120, 150, 180, and 240 grit.
- Longer Lasting : Lasts 3x longer than standard aluminum oxide sand paper.
✕CHOOSE A DIFFERENT TOOL WHEN
- Knockdown of a rough, ridged joint — 150 cuts too slow there; that is 120’s job (09938’s coarser sibling 09944, or the 5″ 45383).
- Final surface under a sheen paint — 150’s scratch can flash under eggshell and satin; 180 (09939) is the pre-sheen grit.
- Sanding paint film between coats — far too coarse; 240 (09940) owns that.
- Curved and contoured surfaces the flat rectangle cannot follow — the 5″ foam sponge disc (45384).
- And field-scale power sanding of broad flat wall — faster on a 9″ net disc (09920) on the radial sander; the sheet is the hand-and-pole tool.
Jobs this tool does
EXACT JOB METHODS FOR HYDE №09938✓ Job guideHow to Control Sanding Dust and Protect Your LungsOPEN JOB GUIDE →✓ Job guidePlan a Grit Sequence for Drywall and Paint PrepOPEN JOB GUIDE →✓ Job guideHow to Sand a Ceiling from the FloorOPEN JOB GUIDE →✓ Job guideHow to Sand a Skim-Coated WallOPEN JOB GUIDE →
VIEW 2 MORE DOCUMENTED JOBS
✓ Job guideHow to Sand Drywall Dust-FreeOPEN JOB GUIDE → ✓ Job guideHow to Wash and Reuse Net AbrasivesOPEN JOB GUIDE →
For these jobs—use this instead
THE JOB, THE REASON, AND THE BETTER TOOL✕ Knockdown of a rough, ridged joint150 cuts too slow there; that is 120’s job (09938’s coarser sibling 09944, or the 5″ 45383). BETTER TOOL 3-5/16″ x 11-1/4″ Net Abrasive Sheets 09944 →✕ Final surface under a sheen paint150’s scratch can flash under eggshell and satin; 180 (09939) is the pre-sheen grit. BETTER TOOL 3-5/16″ x 11-1/4″ Net Abrasive Sheets 09939 →✕ Sanding paint film between coatsFar too coarse; 240 (09940) owns that. BETTER TOOL 3-5/16″ x 11-1/4″ Net Abrasive Sheets 09940 →✕ Field-scale power sandingAnd field-scale power sanding of broad flat wall — faster on a 9″ net disc (09920) on the radial sander; the sheet is the hand-and-pole tool. BETTER TOOL 9″ Net Abrasive Sanding Disc, 150 Grit 09920 →
How the pros run it
01
Cross the scratch
change stroke direction between passes so 150 cuts the previous grit’s lines instead of deepening its own. Weight, not force: the tool’s mass is the pressure; a skim coat is thin and 150 will reach the paper if you push. Raking light is the instrument: 150 is the grit at which “flat” is decided, and flat is only visible in a low, raking light. The skip you may make and the one you may not: you may start at 150 and skip 120 on clean taping; you may not go from 120 to 240 without 150 (or 180) bridging — the fine grit polishes the coarse scratch’s tops and leaves its valleys for the primer to find. Wash before it stops cutting, not after.
