Is this the right tool for your job?
✓CHOOSE THIS WHEN
- Stainless Steel Blade: Offers durability and sharpness for tough scraping tasks. Rust-Resistant.
- Chisel Edge: Ideal for removing paint and putty with precision.
- Full-Tang Blade: Enhances strength and longevity of the scraper.
✕CHOOSE A DIFFERENT TOOL WHEN
- Filling, detail, tight spots, and floor leverage.
- As a stiff blade it doesn’t fill or feather — patching is the flexible knives’ job (the 2″ 01150 and up).
- As a wide blade it’s wrong for detail, corners, hardware surrounds, and stubborn localized spots, where it bridges and skips and its low pressure-per-inch under-performs the narrow stiffs.
- And despite handling floor mastic in a pinch, it is not a floor-leverage tool: a flat 3″ blade drags your knuckles and gives no pry angle — that’s the bent 02070 and the XHD 12010’s territory.
- Use the 01440 for broad, flat, above-grade removal; hand off the rest.
Jobs this tool does
EXACT JOB METHODS FOR HYDE №01440✓ Job guideHow to Lever Cured Glue and Underlayment Residue Off SubfloorsOPEN JOB GUIDE →✓ Job guideHow to Mix Small Batches of Compound or Filler on a BoardOPEN JOB GUIDE →✓ Job guideHow to Remove Adhesive, Mastic, and Tape ResidueOPEN JOB GUIDE →✓ Job guideHow to Shave-Scrape Specks, Labels, and Residue Without Corner-GougingOPEN JOB GUIDE →
VIEW 1 MORE DOCUMENTED JOB
✓ Job guideHow to Scrape Stripper Sludge and Old Finish in Furniture RefinishingOPEN JOB GUIDE →
For these jobs—use this instead
THE JOB, THE REASON, AND THE BETTER TOOL✕ Filling and patchingA stiff 3″ blade tram-lines wet compound; filling is the flexible knives’ job. BETTER TOOL 2″ Flexible 01150 →✕ Floor leverage and masticA flat blade drags knuckles and gives no pry angle; the bent scraper is built for floors. BETTER TOOL 3″ Bent Chisel Scraper 12010 →✕ Detail, corners, and tight spotsA wide blade bridges and skips where a narrow chisel bites. BETTER TOOL 1-5/16″ Chisel 01240 →
How the pros run it
01
Match width to field
the 3″ blade is a broad-field tool — use it where the surface is flat and the failure is spread out; drop to a narrow stiff for stubborn spots, corners, and contour, where concentrated pressure and fit beat coverage. Low angle, bevel under: 15–30°, flat back toward the surface to shave, bevel rolled down to get under a film. Push with your body: a wide blade needs real force behind it because pressure-per-inch is low — put your weight over it, don’t just use your wrist. Keep the bevel keen: dress the single bevel on a stone when it dulls; a wide dull chisel skids and gouges. Stainless payoff: wet broad-field removal — wallpaper, water-rinse stripper, solvent adhesive work — with no rust and no ritual; the carbon 3″ chisel (02400) holds a keener dry edge but rusts, so it’s the dry-field specialist and this is the wet one.
